Call us on 03333 701 701

Dyson Airblade Wash + Dry
Dyson Airblade Wash + Dry Image 1
Dyson Airblade Wash + Dry Image 2
Dyson Airblade Wash + Dry Image 3

Dyson Airblade Wash + Dry WD05 Tall

Dyson have done it again with their latest product, the Dyson Wash + Dry 2-in-1 hand dryer. This amazing product is both a tap and a hand dryer, letting the operator clean their hands and then dry them in as little as 14 seconds thanks to the presence of Airblade technology.

If you are looking for a cost-effective hand dryer that is the most hygienic option available, you have found it; the Wash + Dry is the only hand dryer on the market that boasts HACCP international certification.

Using precise infrared, the Dyson Airblade WD05 can be used without having to touch anything. This, alongside the HACCP certification and HEPA filters that remove 99.99% of bacteria from the Dyson WD05's airflow, makes it the cleanest wash + dry system on the market.

Key features:

  • Clean and dry hands at the sink
  • Up to 14 seconds dry time
  • Dyson's V4 digital motor delivering airflow at 331 mph
  • 80dbA makes it 37% quieter than the Dyson AB14
  • Easy to clean and maintain
  • Meets international HACCP standards
  • Easy to clean and maintain
  • Removes the need for wall-mounted dryers and dispensers

Hillside Hand Dryers is a Independent Dyson repair specialist, maintenance provider, and retailer of Dyson machines such as the Dyson WD05. If you have any questions, queries, or would simply like to find out more about what we can offer you, drop us an email or call our telephone line—we are on-hand to help!

1,050.00+ Vat

Please note all hand dryers paid for on card will only be shipped to the registered card address. If you wish to ship to a different address please pay by bank transfer (more details available at checkout).

The 2-in-1 Dyson WD05 Wash + Dry

There are plenty of reasons why the Dyson WD05 is the system that you need in your washrooms—forget your old-fashioned wall mounted systems!

Since it is a 2-in-1 system, your visitors can wash and dry their hands in a single place. Not only does this make visits to your washroom(s) quicker and more pleasant, it eliminates the need for visitors to move from A to B to dry their hands, thus reducing unhygienic and potentially hazardous soiling of the floor with waste water. The WD05 Wash + Dry is also ideal for smaller washrooms since it does not take up valuable wall space.

Spinning at up to 81,000 rpm, the Dyson V4 digital motor quite literally 'scrapes' water from the hands during drying mode. This makes the drying process three times faster than conventional hand dryers; up to 21 litres of air is pulled through the machine per second.

Dyson specifically engineered their Wash + Dry models to be the quietest yet, too. Compared to the classic Dyson AB14, the WD05 is 39% quieter thanks to reduced apertures measuring just 0.55mm in width.

During operation, it switches intuitively between waterflow and airflow; there is no end-user input involved at all.

Dyson WD05 Installation Notes

The WD05 is the 'tall' version of the sink-mounted Wash + Dry system. It requires minimum sink dimensions of 300mm front to back, 350mm in width, and 100mm in depth. The tap measures at H309mm x L286mm x W303mm. Please see the Dyson WD04 model for the shorter version or the Dyson WD06 model for the wall-mounted option. It is recommended that a specialist install the Dyson Wash + Dry for best results.

Please contact us if you have any questions or queries—we are happy to help.

Technical Information

Input Voltage: 200-240v

Wattage: 1000w

Required Sink Dimensions:

Minimum Sink Width: 350mm

Minimum Sink Front to Back: 300mm

Tap Dimensions:

Height: 309mm

Length: 286mm

Width: 303mm

Manufacturer Dyson
Model Airblade Wash + Dry
Condition New
Colour Brushed Satin Stainless Steel
Weight 0kg
Boxed Dimensions (WxHxD) 450mm x 290mm x 280mm
Item Dimensions (WxHxD) 0mm x 0mm x 0mm

This is not an official Dyson website and Hillside Hand Dryers have no connection with Dyson.